Before you can access the files on a file system, you need to mountthe file system. Mounting a file system attaches that file system to a directory(mount point) and makes it available to the system. Theroot (/) file system is always mounted. Any other filesystem can be connected or disconnected from the root (/)file system.
A third option for mounting an NFS share is the use of the autofs service. Autofs uses the automount daemon to manage your mount points by only mounting them dynamically when they are accessed. Autofs consults the master map configuration file /etc/auto.master to determine which mount points are defined.
When you mount a file system, any files or directories in the underlyingmount point directory are unavailable as long as the file system is mounted.These files are not permanently affected by the mounting process, and theybecome available again when the file system is unmounted. However, mountdirectories are typically empty, because you usually do not want to obscureexisting files.
For example, the figure below shows a local file system, starting witha root (/) file system and subdirectories sbin, etc, and opt.
- How To Automatically Mount NFS File System with AutoFS Autofs also referred to as automount is a feature in Linux like systems that automatically mount filesystems on demand. In Linux, we mount filesystems using two ways: in / etc /fstab and using austofs.
- Now /media/nfs is the dir that will contain your NFS shares (you dont have to create that, autofs does that for you) and /etc/auto.nfs is the configuration file for your shares. We will make that now.
Figure 34-1 Sample root (/) File System
Now, say you wanted to access a local file system from the /opt file system that contains a set of unbundled products.
First, you must create a directory to use as a mount point for the filesystem you want to mount, for example, /opt/unbundled.Once the mount point is created, you can mount the file system (by using the mount command), which makes all of the files and directories in /opt/unbundled available, as shown in the figure below. See Chapter 36, Mounting and Unmounting File Systems (Tasks) for detailed instructions on how to perform thesetasks.
Figure 34-2 Mounting a File System
The Mounted File System Table
Whenever you mount or unmount a file system, the /etc/mnttab (mount table) file is modified with the list of currently mountedfile systems. You can display the contents of this file with the cat or more commands, but you cannot edit it.Here is an example of an /etc/mnttab file:
The Virtual File System Table
It would be a very time-consuming and error-prone task to manually mountfile systems every time you wanted to access them. To fix this, the virtual file system table(the /etc/vstab file) was created to maintain a listof file systems and how to mount them. The /etc/vfstabfile provides two important features: you can specify file systems to automaticallymount when the system boots, and you can mount file systems by using onlythe mount point name, because the /etc/vfstab file containsthe mapping between the mount point and the actual device slice name.
A default /etc/vfstab file is created when youinstall a system depending on the selections you make when installing systemsoftware; however, you can edit the /etc/vfstab fileon a system whenever you want. To add an entry, the main information you needto specify is the device where the file system resides, the name of the mountpoint, the type of the file system, whether you want it to mount automaticallywhen the system boots (by using the mountall command),and any mount options.
The following is an example of an /etc/vfstab file.Comment lines begin with #. This example shows an /etc/vfstab file for a system with two disks (c0t0d0and c0t3d0).
In the above example, the last entry specifies that a UFS file systemon the /dev/dsk/c0t3d0s7 slice will be automaticallymounted on the /test mount point when the system boots.Note that, for root (/) and /usr,the mount at boot field value is specified as no, because these file systems are mounted by the kernel as partof the boot sequence before the mountall command is run.
See Chapter 36, Mounting and Unmounting File Systems (Tasks) for descriptions of each of the /etc/vfstab fields and information on how to edit and use the file.
The NFS Environment
NFS is a distributed file system service that can be used to share resources (files or directories) from one system, typically a server,with other systems across the network. For example, you might want to sharethird-party applications or source files with users on other systems.
NFS makes the actual physical location of the resource irrelevant tothe user. Instead of placing copies of commonly used files on every system,NFS allows you to place one copy on one system's disk and let all other systemsaccess it across the network. Under NFS, remote files are virtually indistinguishablefrom local ones.
A system becomes an NFS server if it has resources to share over thenetwork. A server keeps a list of currently shared resources and their accessrestrictions (such as read/write or read-only).
When you share a resource, you make it available for mounting by remotesystems.
You can share a resource in these ways:
By using the share or shareall command
Maccleanse 6 0 4 download free. By adding an entry to the /etc/dfs/dfstab (distributed file system table) file and rebooting the system
See Chapter 36, Mounting and Unmounting File Systems (Tasks) for information on how to share resources.See System AdministrationGuide, Volume 3 for a complete description of NFS.
AutoFS
You can mount NFS file system resources by using a client-side servicecalled automounting (or AutoFS), which enables a system to automatically mountand unmount NFS resources whenever you access them. The resource remains mountedas long as you remain in the directory and are using a file. If the resourceis not accessed for a certain period of time, it is automatically unmounted.
AutoFS provides the following features:
NFS resources don't need to be mounted when the system boots,which saves booting time.
Users don't need to know the root password to mountand unmount NFS resources.
Network traffic might be reduced, since NFS resourcesare only mounted when they are in use.
The AutoFS service is initialized by automount, whichis run automatically when a system is booted. The automount daemon, automountd, runs continuously and is responsible for the mountingand unmounting of the NFS file systems on an as-needed basis. By default,the Solaris operating environment automounts /home.
AutoFS works with file systems specified in the name service. This informationcan be maintained in NIS, NIS+, or local /etc files.With AutoFS, you can specify multiple servers to provide the same file system.This way, if one of the servers is down, AutoFS can try to mount from anothermachine. You can specify which servers are preferred for each resource inthe maps by assigning each server a weighting factor.
See System AdministrationGuide, Volume 3 for complete information on how to setup and administer AutoFS.
The Cache File System (CacheFS)
If you want to improve the performance and scalability of an NFS orCD-ROM file system, you should use the Cache File System (CacheFS). CacheFSis a general purpose file system caching mechanism that improves NFS serverperformance and scalability by reducing server and network load.
Live home 3d pro crack. Designed as a layered file system, CacheFS provides the ability to cacheone file system on another. In an NFS environment, CacheFS increases the clientper server ratio, reduces server and network loads, and improves performancefor clients on slow links, such as Point-to-Point Protocol (PPP). You canalso combine CacheFS with the AutoFS service to help boost performance andscalability.
See Chapter 37, The Cache File System (Tasks) for detailed information aboutCacheFS.
Deciding How to Mount File Systems
The table below provides guidelines on mounting file systems based onhow you use them.
Table 34-3 Determining How to Mount File SystemsIf You Need to Mount .. | Then You Should Use .. |
---|---|
Local or remote file systems infrequently | The mountcommand entered manually from the command line. |
Local file systems frequently | The /etc/vfstab file, which will mount the file system automatically when thesystem is booted in multi-user state. |
Remote file systems frequently,such as home directories |
To enhance performance, you can also cachethe remote file systems by using CacheFS. |
You can mount a CD-ROM containing a file system by simply insertingit into the drive (Volume Management will automatically mount it). You canmount a diskette containing a file system by inserting it into the drive andrunning the volcheck command. See Chapter 14, Guidelines for Using CDs and Diskettes (Overview)for more information.
RHCSA 8 Exam Practice Question 13
Question
configure NFS client(192.168.170.171) to use NFS shares from server DRDEV1 which has an IP of 192.168.170.172 and make it persistent across reboot using automounter (autofs) with a direct map
The NFS share is /softwaredownload and must be mounted on '/software/review' with read write access. use 'nfsmount' as the map file name
The question is based On using automounter with NFS In The RHCSA 8 Course on this website. If you have gone through this course, solving this wouldn't be a problem.
Answer
1. Install nfs-utils packageif it is available on your system. This is RHEL 8, no worries if it is not available.
2. verify the status of rpcbind service. Start and enable it if it is not.
3. verify that the NFS share is available.
NB: The server host name can also be replaced with the IP
OR
4. Install the autofs package.
5. create a direct master map file as a drop-in file in /etc/auto.master.d
Autofs Nfs Apk
6. create '/etc/auto.nfsshare' map file.
7. Start and enable autofs service
Mount Nfs Centos 7
8. Test your configuration.
9. You may reboot your system and verify again.
Solution Summary
yum install nfs-utils
NFS resources don't need to be mounted when the system boots,which saves booting time.
Users don't need to know the root password to mountand unmount NFS resources.
Network traffic might be reduced, since NFS resourcesare only mounted when they are in use.
The AutoFS service is initialized by automount, whichis run automatically when a system is booted. The automount daemon, automountd, runs continuously and is responsible for the mountingand unmounting of the NFS file systems on an as-needed basis. By default,the Solaris operating environment automounts /home.
AutoFS works with file systems specified in the name service. This informationcan be maintained in NIS, NIS+, or local /etc files.With AutoFS, you can specify multiple servers to provide the same file system.This way, if one of the servers is down, AutoFS can try to mount from anothermachine. You can specify which servers are preferred for each resource inthe maps by assigning each server a weighting factor.
See System AdministrationGuide, Volume 3 for complete information on how to setup and administer AutoFS.
The Cache File System (CacheFS)
If you want to improve the performance and scalability of an NFS orCD-ROM file system, you should use the Cache File System (CacheFS). CacheFSis a general purpose file system caching mechanism that improves NFS serverperformance and scalability by reducing server and network load.
Live home 3d pro crack. Designed as a layered file system, CacheFS provides the ability to cacheone file system on another. In an NFS environment, CacheFS increases the clientper server ratio, reduces server and network loads, and improves performancefor clients on slow links, such as Point-to-Point Protocol (PPP). You canalso combine CacheFS with the AutoFS service to help boost performance andscalability.
See Chapter 37, The Cache File System (Tasks) for detailed information aboutCacheFS.
Deciding How to Mount File Systems
The table below provides guidelines on mounting file systems based onhow you use them.
Table 34-3 Determining How to Mount File SystemsIf You Need to Mount .. | Then You Should Use .. |
---|---|
Local or remote file systems infrequently | The mountcommand entered manually from the command line. |
Local file systems frequently | The /etc/vfstab file, which will mount the file system automatically when thesystem is booted in multi-user state. |
Remote file systems frequently,such as home directories |
To enhance performance, you can also cachethe remote file systems by using CacheFS. |
You can mount a CD-ROM containing a file system by simply insertingit into the drive (Volume Management will automatically mount it). You canmount a diskette containing a file system by inserting it into the drive andrunning the volcheck command. See Chapter 14, Guidelines for Using CDs and Diskettes (Overview)for more information.
RHCSA 8 Exam Practice Question 13
Question
configure NFS client(192.168.170.171) to use NFS shares from server DRDEV1 which has an IP of 192.168.170.172 and make it persistent across reboot using automounter (autofs) with a direct map
The NFS share is /softwaredownload and must be mounted on '/software/review' with read write access. use 'nfsmount' as the map file name
The question is based On using automounter with NFS In The RHCSA 8 Course on this website. If you have gone through this course, solving this wouldn't be a problem.
Answer
1. Install nfs-utils packageif it is available on your system. This is RHEL 8, no worries if it is not available.
2. verify the status of rpcbind service. Start and enable it if it is not.
3. verify that the NFS share is available.
NB: The server host name can also be replaced with the IP
OR
4. Install the autofs package.
5. create a direct master map file as a drop-in file in /etc/auto.master.d
Autofs Nfs Apk
6. create '/etc/auto.nfsshare' map file.
7. Start and enable autofs service
Mount Nfs Centos 7
8. Test your configuration.
9. You may reboot your system and verify again.
Solution Summary
yum install nfs-utils
systemctl status rpcbind
showmount -e 192.168.170.172
yum install autofs
vim /etc/auto.master.d/nfsmount.autofs
Snagit 4 1 6 – screen capture utility. vim /etc/auto.nfsmount
systemctl enable –now autofs
ls -l /software/review
You can also watch the Video on RHCSA 8 Exam Practice Question 13 by clicking the link below.
Your feedback is welcomed. If you love others, you will share with others